Table of Contents
Advertisement
Outer Door Panel
The outer door panel covers the door to the
dishwasher and must be removed to access the
control panel, detergent/rinse module, bottom door
seal, and the heating element.
Outer Door Panel Removal
1. To remove the outer door panel, remove 12
Phillips head screws.
2. Lower the door panel from the control panel.
Control Panel
Control Panel Removal
1. Remove the outer door panel. (See Outer Door
Panel Removal.)
2. Remove 2 Phillips head screws from the door
latch.
Dishwasher Components
– 14 –
3. Tilt the control panel out to clear the lip and
remove.
The escutcheon console cover or top trim
with lettering is replaced using adhesive.
Static Dry System
The static dry system operates through a vent,
located behind the left side door panel. The vent
allows hot air to exit the dishwasher tub and
gradually remove moisture that runs through the
tube and back into the tub.
Static Dry System Removal
1. Remove the control panel. (See Control Panel
Removal.)
2. Turn the static dry vent cover counterclockwise
and remove.
Cover
Vent
(Continued next page)
Hide quick links:
Advertisement
Table of Contents
