Prepare Dishwasher Enclosure - GE GSD3301K00BB Installation Instructions Manual

Installation Preparation – Enclosure

PREPARE DISHWASHER ENCLOSURE

WARNING
To reduce the risk of shock, fire, or injury
to persons, the installer must ensure that
the dishwasher is completely enclosed at
the time of installation.
ADVERTENCIA
Para reducir el riesgo de choque, incendio
o lesión a personas, el instalador se
debe cerciorar de que la lavadora esté
completamente cerrada en el momento
de la instalación.
• The rough cabinet opening must have a minimum
width and depth of 24" and height of 34-1/2"
countertop.
• The back wall should be free of pipes or wires.
• Adjacent cabinets should be square and plumb to
Figure A
• For a corner installation, allow 2" minimum
clearance between the dishwasher and the
adjacent wall.
• Provide at least 27" in front of the dishwasher to
allow the dishwasher door to open fully. Refer to
Figure B.
Countertop
Dishwasher
2" Minimum
Figure B
facilitate removal of the dishwasher at a later date
for service, if needed.
• The dishwasher must be installed no more than
10 feet from sink for proper drainage.
• The dishwasher must be fully enclosed on the top,
sides and back.
• The dishwasher must not support any part of the
enclosure.
Clearances:
In a corner installation,
provide at least 2"
clearance between the
dishwasher and the
adjacent cabinet, wall or
other appliance.
Provide at least 27" of
clearance in front of the
27" Minimum
dishwasher.
3