Fill Funnel - GE Spacemaker GSM1800J Series Technical Service Manual

7. Remove the nut and ground wire.
8. Remove the lock-washer and spacer bracket.
Lock-
washer
Nut
9. Release the 2 heating element clamps.
10. Lift up and remove the heating element from
the dishwasher.
Spacer Bracket
Ground Wire
– 20 –
Heating Element
11. Reverse the above procedure to install.

Fill Funnel

The fill funnel is mounted on the left side of the
tub. Its purpose is to provide a method of
supplying water for the wash and rinse cycles.
The air gap prevents the siphoning of wash water
from flowing back into the water supply system,
should the water pressure drop to less than
atmospheric pressure. The fill funnel also allows
air into the tub to permit air flow for dish drying.
Removal and Replacement
1. Fold back the insulation surrounding the fill
funnel and air gap assembly.
2. Open the dishwasher door.
3. Rotate the fill funnel cap counterclockwise and
remove it from the fill funnel threads.
Funnel Cap
Threads
Turn CCW