5. Remove the 3 screws and top mounting
bracket.
6. Remove the 3 screws and bottom mounting
bracket.
7. Remove the detergent/rinse module from door
assembly.
Detergent/Rinse Module
Removal and Replacement
Bracket
1. Disconnect power.
2. Remove the 6 screws that connect the control
3. Close the dishwasher door.
4. Release the door latch and allow the control
5. Disconnect the ground wire from the Timer.
6. Disconnect the green and white multi-pin
7. Disconnect the 4 terminal lugs from the Door
8. Disconnect the 2 terminal lugs from the
Bracket
9. Remove the Door Panel.
10. Disconnect the 2 terminal lugs from the
– 16 –
Door Assembly
panel cover to the dishwasher door. (See
Timer, step 6.)
panel cover to hang against the dishwasher
door.
connectors from the Timer.
Switch and Latch Assembly.
Heated Dry Switch.
Heated Dry Switch
Door Latch
Detergent/Rinse Module switch.
Timer