Table Of Contents - Smoke hollow 1800CGS Assebly And Operation Manual

Assembly
Step 4
Fig. 4
Step 5
Fig. 5
Step 6
Fig. 6
Step 4: Attach LP Gas Cylinder Bottom
Support Brace
Locate: The tubular Support Brace, (2) M6x15
bolts
Procedure:
Refer to Fig. 4 and attach the Support Brace to
the INSIDE of the Left Side Front and Rear
Legs using (1) M6x15 bolt at each end of the
Brace
Step 5: Attach Fire Box Support Brace
Locate: Fire Box Support Brace, (4) M6x15
bolts, (4) M6 KEPS nuts
Procedure:
Refer to Fig. 5 and Place the Fire Box Support
Brace BETWEEN the Legs on the RIGHT side
of the Cabinet, so that the LEDGE is at the
TOP and facing through the Legs. Fasten to
BOTH legs with (2) M6x15 bolts and (2) M6
KEPS nuts on each Leg
Step 6: Attaching Casters
Locate: (4) Locking Casters
Procedure:
Refer to Fig. 6 and screw a Caster onto each
Leg, then tighten with a wrench.
Note: LOCK ALL CASTERS BEFORE GOING
TO STEP 7.
9