Smoke hollow 1800CGS Assebly And Operation Manual page 15

Assembly
Step 16: Attaching the Charcoal Tray, the
Step 16
Fig.16A
Adjusters and Knobs
Locate: Left Side and Right Side Adjuster
Brackets, Charcoal Tray Assembly, (4) M6x15
bolts, (3) Gas Valve Control Knobs and the
Damper Knob
Procedure: Refer to Fig. 16A and 16B and
attach the Left and Right Side brackets as shown
with (2) M6x15 bolts in each Bracket. Refer to
Fig.16C – align the "D" shaped socket of the Gas
Valve Control Knobs with the Valve stems and
gently but firmly, PUSH the Knobs onto the
stems. Refer to Fig.16D and screw the Damper
Control Knob into the slotted hole of the Damper
Plate. Check to see that the plate will slide back
Fig.16B
and forth easily. Refer to Fig. 16E and hang the
Charcoal Tray Assembly Handles onto the
Adjuster Brackets. Charcoal Tray Assembly
Handles onto the Adjuster Brackets.
Fig.16C
Fig.16D
Fig.16E
15