Table of Contents
Advertisement
4.
OPERATINg INSTRUcTIONS
connect Inverter Power cable:
•
Plug the included power cable into the inverter. Note, the plug will only fit into
the outlet one way.
•
Push the 12V end (cigarette plug) of the power cable firmly into the 12V
accessory outlet. The LEd indicator light should glow BLUE verifying
the inverter is receiving power. If the LEd indicator is not on, check the
connection and fuses.
connecting and using the Ac or USB device:
•
Make sure that the device to be operated is turned OFF.
•
Plug the device into the Travel Inverter AC outlet or USB port.
•
Turn the device on. If the device doesn't work and the LEd blinks, refer to
section 4.
•
To disconnect, reverse the above procedure.
NOTE: You may hear a "buzzing" sound being emitted from inexpensive sound
systems when operated with the inverter. This is due to ineffective filters in the
sound system's power supply. Unfortunately, this problem can only be resolved
by purchasing a sound system with a higher quality power supply or higher
quality filter.
Mounting the Travel Inverter 120 in your car:
•
Peel and stick the Velcro strips on back of holder
•
Attach holder to desired location in vehicle
•
Slide inverter into case
dC Outlet
• 5 •
dC Plug
Advertisement
Table of Contents
