Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DieHard 28.71520
Summary of Contents for DieHard 28.71520
- Page 1 OPERATOR’S MANUAL 120 Watt Power Inverter Model No. 28.71520 Read and follow all Safety Rules and Operating Instructions before Every Use of this Product. SAvE ThESE INSTRUcTIONS. Sears Brands Management corporation, hoffman Estates, IL 60179 U.S.A. 00-99-001005/00...
-
Page 3: Table Of Contents
1 year from the date of purchase, return it to any diehard outlet in the United States for free replacement. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. - Page 4 IMPORTANT: READ AND SAvE ThIS SAfETY AND INSTRUcTION MANUAL. SAvE ThESE INSTRUcTIONS – The 71520 offers a wide range of features to accommodate your needs. This manual will show you how to use your inverter safely and effectively. Please read, understand and follow these instructions and precautions carefully, as this manual contains important safety and operating instructions.
-
Page 5: Important Safety Instructions
IMPORTANT SAfETY INSTRUcTIONS SAvE ThESE INSTRUcTIONS Risk of electric shock or fire. Keep out of reach of children. Keep the inverter well ventilated in order to properly disperse heat generated while it is in use. Make sure there are several inches of clearance around the top and sides and do not block the slots of the inverter. -
Page 6: Features
fEATURES Inverter holder LEd Indicator AC Outlet USB Port 12 Volt Power Plug BEfORE USINg YOUR POWER INvERTER NOTE: This inverter is designed to be used with a single battery, up to group 31 type and 130 Ah or smaller in size. do not use with any larger battery type. do not use with multiple batteries connected in parallel. - Page 7 To calculate the starting load: Starting Load = 2 x WATTS. In general, the start up load of the device or power tool determines whether your inverter has the capability to power it. To calculate the continuous load: Continuous Load = AMPS x 120 (AC Voltage). Always run a test to establish whether the inverter will operate a particular piece of equipment or device.
-
Page 8: Operating Instructions
OPERATINg INSTRUcTIONS connect Inverter Power cable: dC Outlet dC Plug • Plug the included power cable into the inverter. Note, the plug will only fit into the outlet one way. • Push the 12V end (cigarette plug) of the power cable firmly into the 12V accessory outlet. -
Page 9: Led Indicator And Shutdown Protection
LED INDIcATOR AND ShUTDOWN PROTEcTION The LEd glows BLUE automatically when plugged into a 12-volt dC source and will not glow under the following conditions: When the power input from the vehicle’s battery drops to approximately 10.5-volts, low battery shutdown occurs and inverter shuts off. Solution: Recharge or Replace the battery. -
Page 10: If The Inverter Fuse Blows
If ThE INvERTER fUSE BLOWS Your power inverter is fitted with a fuse, which should not have to be replaced under normal operating conditions. A blown fuse is usually caused by reverse polarity or a short circuit within the device or equipment being operated. If the fuse does blow: disconnect the device or equipment immediately. -
Page 11: Specifications
SPEcIfIcATIONS Maximum Continuous Power 120 Watts Surge Capacity (Peak Power) 240 Watts No Load Current draw <0.4 Amp, 400mA Wave Form Modified Sine Wave Input Voltage Range 10.5 – 15.5V dC Low Battery Alarm Output Voltage 110 – 125V AC Low Battery Shutdown 9.9V –...