Table of Contents
Advertisement
2.
fEATURES
1
3.
BEfORE USINg YOUR POWER INvERTER
NOTE: This inverter is designed to be used with a single battery, up to group 31 type
and 130 Ah or smaller in size. do not use with any larger battery type. do not use
with multiple batteries connected in parallel.
NOTE: do not use the inverter with a product that draws a higher wattage than the
inverter can provide, as this may cause damage to the inverter and product.
When you turn on a device or a tool that runs on a motor, the device basically goes
through two stages:
1.
Start Up – Requiring an initial surge of power (commonly known as the
"starting or peak load").
2.
Continuous Operation – Power consumption drops (commonly known as
the "continuous load").
The wattage (WATTS) or amperes (AMPS) can normally be found stamped or
printed on most devices and equipment, or in the user's manual. Otherwise, contact
the manufacturer to find out whether the device you want to use is compatible with a
modified sine wave.
To calculate the wattage: Wattage = AMPS x 120 (AC Voltage).
2
5
3
1.
Inverter holder
2.
LEd Indicator
3.
AC Outlet
4
4.
USB Port
5.
12 Volt Power Plug
• 3 •
Advertisement
Table of Contents
