Pxl Pcb - Oki OKIPAGE 8c Plus Maintenance Manual

3.3.43 PXL PCB

1. Remove the paper eject assy. (See 3.3.3)
2. Remove the belt cassette assy. (See 3.3.32)
3. Remove the heat unit assy. (See 3.3.40)
4. Unplug the cable 1 and the screw 2, then remove PXL PCB 3.
Release the lock of the claw then remove the sensor cover 4.
5.
41057601TH Rev.1
2
4
1
3
Figure 3.3.43 PXL PCB
90/