3.3.16 Power Supply Unit, Holder Inlet, Sheet Insulation
1.
Remove the motor-fan (80-25). (See 3.3.2)
2.
Remove the frame side (L), the cover assy side (R) and the cover rear (L). (See 3.3.8)
3.
Unplug the cable 1.
4.
Remove the holder inlet 3 by unscrewing 2 screws 2, then remove the power switch 4 and
unplug the AC socket 5.
5.
Draw the power supply unit 7 by unscrewing 3 screws 6, then unplug the cable 8.
6
2
Figure 3.3.16 Power Supply Unit, Holder Inlet, Sheet Insulation
41057601TH Rev.1
1
5
3
8
7
4
63/