Oki OKIPAGE 8c Plus Maintenance Manual page 108

Category LCD Status
Message K
Daily status TNR SNS ******* ON
FRONT TRAY ERROR Undefined
PRESS
RECOVERKEY
Buffer ERROR MEMORY Undefined
Overflow OVERFLOW
ERROR RECEIVE Undefined
BUFFER OVERFLOW
Paper Size ERROR PAPER SIZE Undefined
Error CHECK tttttt
PAPER INPUT JAM
Paper Jam Undefined
Error CHECK tttttt
LED
C M Y READY
ON ON ON Undefined
Undefined Undefined Undefined OFF
Undefined Undefined Undefined OFF
Undefined Undefined Undefined OFF
Undefined Undefined Undefined OFF
Undefined Undefined Undefined OFF
ATTENTION Trouble or Status
ON Indicates that Toner sensor is abnormal when page
counter is above thirty. (The LED of the color lights)
Blink Indicates that the front feeder has caused a home
position error.
Blink Indicates that data overflowed the memory space.
- Too much print data in one page
- Too much macro data
- Too much DLL data
- Data overflow after compression of frame data
Blink Indicates that the receive buffer was overflowed.
Blink Indicates that paper of the illegal size was fed from
the specified tray.
tttttt: Tray type (Tray 1, Tray 2, or Front)
Blink Indicates that a paper jam occurred on the paper
feeding from the specified tray.
tttttt: Tray type (Tray 1, Tray 2, or Front)
Remedy
This massage is cleared when the
drum is properly positioned or
sensor lever which is exchanged
correspond to the LED color lights.
The front feeder becomes not avail-
able when the RECOVER switch is
pressed. The other tray is available.
This message is cleared when the
front feeder assembly is replaced.
This error is recovered when the
RECOVER switch is pressed.
Expand RAM or reduce data.
This error is recovered when the
RECOVER switch is pressed.
Change the setting of Receive
Buffer Size in the User Maintenance
more bigger then send the data from
the host or expand RAM.
Check the size of paper in the tray
or whether two or more paper
sheets are fed at a time.
When the cover is opened and
closed, this error is reset and print-
ing resumes. If this error occurs fre-
quently, go to 6.5.2.
Check the size of paper in the tray
or whether two or more paper
sheets were fed at a time. When
the cover is opened and closed, this
error is reset and printing resumes.
If this error occurs frequently, go to
6.5.2.