3.3.23 Guide Paper Input Assy
1.
Remove the cover assy OP panel, cover front (R) and the cover front (L). (See 3.3.8)
2.
Remove the feeder unit front. (See 3.3.21)
3.
Unscrew 4 screws 1 then draw out the guide paper input assy 2 from the left side by rotating
its upper part . (Be careful not to damage the lever sensor resist.)
Lever Sensor Resist
41057601TH Rev.1
Figure 3.3.23 Guide Paper Input Assy
2
1
1
70/