Oki OKIPAGE 8c Plus Maintenance Manual page 109

Category LCD Status
Message K
Paper Jam PAPER FEED JAM Undefined
Error CHECK tttttt
PAPER EXIT JAM Undefined
REMOVE THE PA-
PER
Interface Undefined
Jam 001
Error Error
Controller EEPROM Undefined
Error RESETTING
LED
C M Y READY
Undefined Undefined Undefined OFF
Undefined Undefined Undefined OFF
Undefined Undefined Undefined OFF
Undefined Undefined Undefined OFF
ATTENTION Trouble or Status
Blink Indicates that a paper coming out of the tray jammed
on the paper traveling printer.
tttttt: Tray type (Tray 1, Tray 2, or Front)
Blink Indicates that a paper jammed on the way to the
exit.
Blink
Indicates that Process error occurred.
Blink Indicates that the ID number of EEPROM is invalid.
Remedy
Check the size of paper in the tray
or whether two or more paper
sheets were fed at a time. When
the cover is opened and closed, this
error is reset and printing resumes.
If this error occurs frequently, go to
6.5.2.
Open the cover and remove a pa-
per jam from the inside of the page
printer. When the cover is opened
and closed, this error is reset and
printing resumes. If this error oc-
curs frequently, go to 6.5.2.
Notifies that the power supply LSI
has been reset due to noise, etc.
(process error)
Open cover and remove the paper.
Close cover to recover and proceed.
Sets the default values in EEPROM
and it'll be recovered automatically.