Setting Up Your Home Theater System - Panasonic SC-ZT1 Operating Instructions Manual

Setting up your Home Theater system

Step
Installing the speakers
1
You can make your preferred setting because speaker
cords are not required.
• Make sure to place the speakers on a flat, stable surface so there is no
danger of them falling over.
• AC mains lead (included) is necessary for each speaker.
Step
Connecting the television and DVD recorder
2
(Peripheral equipment and cables are not included unless otherwise mentioned.)
Install and connect the main unit and other equipment.
Connecting TV
Necessary cable:
(For images and audio)
(For audio)
Connecting recorder
Necessary cable:
(For images and audio)
• Only with HDMI cable connection, you cannot enjoy TV sounds on this system. Connect TV and the main unit
using the optical fibre cable (or stereo phono cable) to enjoy TV sound on this system.
• Connect with an HDMI cable for high-quality audio and video.
• This connection requires HDMI terminals on both the television and the DVD recorder.
Step
Setting the speakers
3
Use the remote control for speaker setting.
• Make sure to make the speaker setting when using for the first time after
purchase.
Step
4 Enjoying movies and music
Enjoy surround sound with DVDs, TV, and other
sources.
• Audio is transmitted wirelessly.
4
RQT9472
HDMI cable: 1 (not included)
Optical fi bre cable: 1 (not included)
HDMI cable: 1 (not included)
(➜ page 9)
(➜ page 15)
(➜ page 18)
(➜ page 10)
I need 2 HDMI
cables and 1
optical fi bre cable
for connections.