Panasonic SC-ZT1 Operating Instructions Manual page 7

Speaker (with built-in amplifi er)
Pole
(mid-high part)
Base
(woofer part)
Note
TEST terminal: This is used to check the product operation status. Only used in factory. Do not insert a foreign object.
ID switch: This is used to check the product operation status and not used regularly.
Remote control
Standby/on button (➜ page 18)
Test signal output (➜ pages 16, 23)
For using "WHISPER-MODE SURROUND"
For using "GAME" (➜ page 22)
For entering setup mode
(➜ pages 11, 17, 22 to 26)
For selecting or cancelling
Dolby Virtual Speaker,
Dolby Pro Logic and SFC mode
Front view
[WIRELESS LINK] indicator
(➜ page 15)
When the unit is connected to the
AC mains supply, this indicator
lights red in standby mode and
lights green when the unit is turned
on.
(➜ page 22)
(➜ page 19)
Side view
AC inlet
(➜ page 14)
AC IN
Unit on/off button (l ^ k I) (➜ page 15)
Use this button to turn the unit on and off.
l (off): The unit is in standby mode.
k (on): The unit is on.
The unit is still using a small amount of
power in the standby. Standby uses less
power.
Input mode and remote control code
buttons (➜ pages 18, 26)
For adjusting speaker output
(➜ pages 22, 23)
For adjusting the volume (➜ page 18)
Muting (➜ page 22)
For adjusting/activating settings
(➜ pages 11, 17, 22 to 26)
For returning to the previous menu
(➜ pages 11, 17, 22 to 26)
Note
For remote control buttons used for speaker
setting, see pages 15 to 17.
TEST
terminal
ID
TEST
ID switch
7
RQT9472