Fujitsu Siemens Computers SCENICVIEW P17-1A Operating Manual page 26

Colour Monitor
SCENICVIEW P17-1A
Setting colour temperature and colours
Calling the Colour setting window
Selecting the colour temperature
The "warmth" of the screen colours is set using the colour temperature. The colour
temperature is measured in K (= Kelvin). You can select from sRGB , 6500 K , 7500
K , 9300 K , Native and Custom Colour .
sRGB
Native
Custom Colour
In the user-defined setting you can change the colour ratios of the basic colours
(red, green, blue) as required.
Setting display of the OSD menu
Calling the OSD Setup setting window
Language Setting language for the OSD menu
With this function you choose between English (default setting), French, German,
Italian and Spanish as the language for the OSD menu.
Setting the horizontal position of the OSD menu
OSD
H-Position
With this function you move the OSD menu to the left or to the right.
Setting the vertical position of the OSD menu
OSD
V-Position
With this function you move the OSD menu up or down.
OSD Setting the display duration of the OSD menu
Timeout
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is
automatically faded out.
Setting the display format of the OSD menu
OSD
Rotation
With this function you switch the OSD menu from portrait mode to landscape
mode and vice versa.
Off
On
18 - English
= setting colour display according to the sRGB standard
= Original colour of the LCD display
= User-defined colours
= The OSD menu is displayed in landscape mode.
= The OSD menu is displayed in portrait mode.
A26361-K960-Z101-1-5E19