Fujitsu Siemens Computers SCENICVIEW P17-1A Operating Manual page 25

Adjusting the brightness and contrast
Calling the Brightness / Contrast setting window.
Brightness Setting the brightness of the display
With this function you change the brightness of the background lighting.
Setting the contrast of the display
Contrast
With this function you modify the contrast of bright colour tones.
Setting the brightness of the display
Black Level
With this function you modify the contrast of dark colour tones.
Setting the brightness of the display
Auto Level
With this function you can automatically set the contrast.
Press the SELECT/MENU button to activate the function.
If the contrast is set too high, bright surfaces can no longer be distinguished from very
i
bright surfaces. If the contrast is set too low, the maximum brightness will not be
achieved.
Adjusting size and position
Calling the Image adjust setting window
Adjusting the horizontal position
H-Position
With this function you move the picture to the left or to the right.
Adjusting the vertical position
V-Position
With this function you move the picture up or down.
Setting synchronisation
Clock
With this function you adjust the picture width to eliminate vertical picture
disturbances.
Eliminating picture interference
Phase
With this function you fine-tune your monitor to eliminate picture interference.
Adjusting the volume
Calling the Audio setting window
Volume Setting the volume for playback with the integrated loudspeakers
Switching the loudspeakers off or on
Mute
A26361-K960-Z101-1-5E19
Colour Monitor
SCENICVIEW P17-1A
English - 17