Installing An Ergonomic Video Workstation - Fujitsu Siemens Computers SCENICVIEW P17-1A Operating Manual

Installing an ergonomic video workstation

Before you set up your equipment, you should select a suitable position for working at the monitor.
Please observe the following advice when installing a video workstation.
1
1 = Windows
Avoid direct and reflected glare.
0°
60°
2
1 = Preferable viewing sector
2 = Permissible viewing sector
Position the monitor for
optimum viewing. The viewing
distance to the monitor should
be approximately 50 cm.
Depending on the situation, the use of a swivel arm or wall bracket (VESA FPMPMI), are available
from specialised dealers, may be advisable. For this purpose the monitor base must be removed
beforehand as described in "Mounting and removing the monitor base" chapter.
A26361-K960-Z101-1-5E19
Avoid glare from electric
lighting.
1
65°
30°
30°
65°
2
Keep ventilated areas clear.
Colour Monitor
SCENICVIEW P17-1A
1
600 mm
1 = Edge of desk
2 = Permissible reaching
sector
Position the keyboard where it
is easiest to reach.
1
1 = approx. 90° and more
2 = approx. 90°
Remember to maintain correct
posture.
600 mm
2
2
2
English - 7