Fujitsu Siemens Computers SCENICVIEW P17-1A Operating Manual page 17

Note on mounting a swivel arm or a wall bracket
For instructions on how to mount the swivel arm or wall bracket, please see the documentation for
the swivel arm or wall bracket.
We recommend always operating the monitor in the standard position (4:3, wide format, landscape
mode).
If you want to operate the monitor with a swivel arm or wall bracket in the portrait mode, it
!
may only be turned by 90° clockwise.
A26361-K960-Z101-1-5E19
Colour Monitor
► Lay the monitor on its face on a soft
surface.
► Remove the cover and disconnect all
cables.
► Remove the four screws on the rear of the
monitor.
You can now mount a swivel arm or a wall
bracket as per VESA FPMPMI with 100 mm hole
spacing.
Permissible position of monitor in portrait mode:
The buttons of the control panel are located on
the left-hand side.
SCENICVIEW P17-1A
English - 9