Connections; Scsi Bus Connections - Fujitsu MAH3182MC Maintenance Manual

5.2

Connections

Figure 5.1 shows examples of connection modes between the host system and the IDD. For the 16-
bit SCSI, up to 16 devices including the host adapter, IDD, and other SCSI devices can be
connected to the SCSI bus in arbitrary combinations. Install a terminating resistor on the SCSI
device connected to both ends of the SCSI cable.
See Section 4.4 for the cable connection requirements and power cable connections.
(1) Connecting one IDD
(2) Connecting more than one IDD (single host)
Figure 5.1 SCSI bus connections (1 of 2)
C141-E103-01EN 5 - 3