Fujitsu MAH3182MC Maintenance Manual page 46

(4) Data field (DATA1-DATA4)
User data is stored in the data field of the sector. The length of the data field is equal to that of the
logical data block which is specified with a parameter in the MODE SELECT command. Any
even number between 512 and 528 bytes can be specified as the length.
(5) BCRC
It is a 4-byte error detection code. Errors in the ID field. Single burst errors with lengths of up to
32 bits for each logical block can be detected.
(6) ECC
This is the 40-byte code that allows detection and correction of errors in the data field, which is
capable of correcting the single burst error up to 160 bits max. on the fly.
(7) PAD
A specified length of x'00' pattern shown in Figure 3.6 is written in this field. This field includes
the variation by rotation and circuit delay till reading/writing.
C141-E103-01EN 3 - 9