Installing and removing drives
In the standard model the PC may be equipped with the following drives:
●
one accessible 3 ½ inch drive (floppy drive)
●
one non-accessible 3 1/2 inch drive (hard disk)
●
one accessible 5 ¼ inch drive (e.g. DVD or CD ROM drive)
or:
●
one accessible 3 ½ inch drive (floppy drive)
●
two non-accessible 3 ½ inch drive (hard disk)
"Accessible drives" are e.g. DVD or CD ROM drives, into which a data carrier can be inserted from
outside. Non-accessible drives are e.g. hard disk drives.
IDE drives and serial ATA drives
By default IDE drives and serial ATA drives are supported (see the technical manual for the
mainboard).
A26361-K675-Z120-1-7619, edition 3
System expansions
43