Installing Board With Clip - Fujitsu Siemens Computers CELSIUS R Operating Manual

2
► Push the rear slot cover plate into the slot (1). Ensure that the point of the cover engages on
the outside of the casing.
► Fasten the rear slot cover plate with the screw (2).
► Close the casing (see "Closing the casing" chapter).
If you have installed or removed a PCI board, please check the relevant PCI slot settings
i
in the BIOS Setup. If necessary, change the settings. Further information is provided in the
PCI board documentation.

Installing board with clip

► Open the casing (see "Opening the casing" chapter).
1
2
► Press on the clip (1) in the direction of the arrow and unhook it.
► Pull off the clip (2).
A26361-K680-Z101-1-7419
1
2
System expansions
33