System expansions
2
►
Lay the rails onto the drive such that the holes in them align with the screw holes (1).
►
Fasten the rails with the screws (2).
►
Plug the data and the power supply connectors into the drive. Make sure the polarity is correct.
►
Attach the front panel (see "Attaching the front panel").
►
Close the casing (see "Closing the casing" chapter).
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
40
1
2
►
Slide the accessible drive into the casing.
2
2
1
A26361-K680-Z101-1-7419