Fujitsu Siemens Computers CELSIUS R Operating Manual page 61

► Remove the blanking plate for the USB or USB audio ports from the front panel.
► Insert the appropriate ports frame for the USB or USB audio ports into the front panel.
i
The USB interface and the USB-audio interface each have a separate interface frame.
► Attach the front panel (see "Attaching the front panel").
► Close the casing (see "Closing the casing" chapter).
Removing front USB or USB audio ports
► Open the casing (see "Opening the casing" chapter).
► Remove the front (see "Removing the front panel" chapter).
► Detach the USB data cable and, if present, the audio data cable from the mainboard (see the
technical manual for the mainboard).
► Disconnect the cables from the floppy disk drive.
► Loosen the screws (1).
► Pull the slide-in module out of the casing (2).
A26361-K680-Z101-1-7419
System expansions
2 1
53