Fujitsu Siemens Computers CELSIUS R Operating Manual page 25

DeskView to get detailed information on the problem that occurred. If in any doubt,
consult your administrator.
LAN connection
appears on the LCD as soon as the workstation is connected to a LAN.
LAN access
appears on the LCD as soon as the workstation sends or receives data over the
LAN.
Message
when software that supports this function is used, the appearance of this symbol on
the display indicates that an incoming message (mail, fax) is waiting.
? Reserved
is reserved for future use.
2 - SmartCard reader indicator (Celsius V only)
The indicator lights up if a SmartCard is inserted.
The indicator flashes if no SmartCard is inserted.
3 - CD-ROM indicator
The indicator lights up when the CD-ROM drive of the workstation is accessed. You may only
remove the CD when the indicator is dark.
4 - Floppy disk indicator
The indicator lights up when the floppy disk drive of the workstation is accessed. You may only
remove the floppy disk when the indicator is unlit.
5 - Hard disk indicator (Celsius R only)
The indicator lights up when the hard disk drive of the workstation is accessed.
6 – Message indicator (Celsius R only)
The indicator glows or flashes when the system has reported a malfunction.
7 - Power-on indicator (Celsius R only)
−
The indicator lights green:
The workstation is on.
−
The indicator lights orange:
The workstation is in energy-saving mode. After being switched on, the workstation
returns to the state it was in before the energy-saving mode.
In an energy-saving mode the workstation must not be switched off with the
!
main power switch (if present) or disconnected from the mains, as this may
result in data loss.
−
The indicator does not light up:
The workstation is disconnected from the power supply or is ready for operation. If the
workstation is ready-to-operate, the workstation can be enabled with the ON/OFF switch.
A26361-K680-Z101-1-7419
Operation
17