Table of Contents
Advertisement
car kit and
Set as
authorised, and answer
confirmation query. If the car kit is set as unauthorised,
connection requests from it must be accepted
separately every time.
To end the remote SIM access connection from your
device, select
Menu
Ctrl. panel
>
Bluetooth
and
Remote SIM mode
Wireless LAN
About WLAN
Your device can detect and connect to WLANs. Using a
WLAN, you can connect your device to the internet and
compatible devices that support WLAN.
To use a WLAN connection, you need the following:
• WLAN must be available in your location.
• Your device must be connected to the WLAN. Some
WLANs are protected, and you need an access key
from the service provider to connect to them.
• An internet access point created for WLAN. Use the
access point for applications that need to connect to
the internet.
A WLAN connection is established when you create a
data connection using a WLAN internet access point.
The active WLAN connection ends when you end the
data connection.
You can use WLAN during a voice call or when packet
data is active. You can only be connected to one WLAN
access point device at a time, but several applications
can use the same access point.
Yes
to the
WLAN indoors.
Features that use WLAN, or that are allowed to run in
the background while using other features, increase
the demand on battery power and reduce the battery
Connectivity
>
>
life.
> Off.
Your device supports the following WLAN features:
• IEEE 802.11b/g standard
• Operation at 2.4 GHz
• Wired equivalent privacy (WEP), Wi-Fi protected
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the
risk of unauthorised access to your data.
When the device is in the offline profile, you can still
use WLAN, if available. Remember to comply with any
applicable safety requirements when establishing and
using a WLAN connection.
See WLAN availability
To set your device to show wireless LAN (WLAN)
availability, select
Note: In France, you are only allowed to use
access (WPA/WPA2), and 802.1x authentication
methods. These functions can be used only if they
are supported by the network.
Important: Always enable one of the available
Tip: To check the unique media access control
(MAC) address that identifies your device, enter
*#62209526# in the home screen.
Menu
Ctrl. panel
>
121
Settings
and
>
Advertisement
Table of Contents
