Table of Contents
Advertisement
Inspections prior to using your power scooter:
1. If equipped with pneumatic tires, please check for proper tire inflations.
2. Please check all electrical connections and make sure they are tight and not corroded.
3. Please check all harness connections and make sure they are secured properly.
4. Please check the brakes.
Weight limitation.
1. Please refer to the specifications table for weight capacity information. Power scooter is rated for a
maximum weight capacity.
2. Stay within the specified weight capacity for your scooter. Exceeding the weight capacity voids your
warranty. Heartway will not be held responsible for injuries or property damage resulting from failure to
observe weight limitations.
3. Don't carry passengers on scooters. Carrying passengers on scooter may affect the center of gravity,
resulting in a tip or a fall.
Tire inflation
1.
If your scooter is equipped with pneumatic tires, it is necessary to check the air pressure at least one time a
week.
2.
Proper inflation pressures will prolong the life your tires and ensure the smooth operation while riding.
3.
Do not under-inflate or over-inflate your tires. It is critically important that 30-25 psi (2-2.4bar) tire
pressure be maintained in pneumatic tires at all times.
4.
Inflating your tires from an unregulated air source could over-inflate them, resulting in a burs tire.
Temperature
1.
Some of the parts of the power scooter are susceptible to change in temperature. The controller can only
operate in temperature that ranges between -25℃ ~ 50℃.
2.
At extreme low temperatures, the batteries may freeze, and your power scooter may not be able to operate.
In extreme high temperatures, it may operate at slower speeds due to a safety feature of the controller that
prevents damage to the motors and other electrical components.
6
Hide quick links:
Advertisement
Table of Contents
