Sleep Function; Nap Timer Function; Radio Operation; Reset - Electrohome EAAC500 User Manual

SLEEP FUNCTION

During radio on mode, press Snooze / Sleep / Nap button (13) to turn on sleep
mode, the sleep time will keep flashing by 10 seconds, within 10 seconds and
press sleep button can change the duration from 90 min – 15 min. Press on/off
button (12) to cancel sleep function.
NAP timer function (countdown timer)
During radio off mode, press snooze / sleep / NAP button (13) to turn on NAP
mode, the NAP time will keep flashing by 10 seconds, within 10 seconds and press
snooze / sleep / NAP (13) button can change the duration from 90 min – 10 min.
The alarm buzzer will sound for 30 min and then shut off automatically. To stop the
alarm buzzer, press the on/off button (12).
Press the snooze / sleep / NAP (13) button has no effect during alarm operation.
Press on/off button (12) to cancel NAP function.
The radio OFF mode, select the display light Auto off / low / high dimmer (21) to the
on/off mode, the LED display will automatically off in 15 seconds. Press any key
button to turn the display on.

RADIO OPERATION

• Press the on/off button (12) to turn radio on.
• Select AM/FM band press the AM/FM band button (11).
• Select the station using the Tuning knob (8).
• Turn the volume knob (7) to adjust volume as required.
• Press the on/off button (12) to turn radio off.
Note : The AM band use an internal directional aerial, rotate the radio for best
reception. Ensure that the FM antenna (23) is completely unrolled and
extended for best FM reception.

RESET

The reset button (20) is located on the back of unit. Use a ballpoint pen to press it
whenever you change the batteries, or unit is not performing as expected. This will
return all settings to default value, you will lose any stored data (alarm and clock
settings).
OPERATION
- 7 -