Alarm Duration; Snooze Function; Sleep Timer; Adjusting Led Brightness - Electrohome EAAC302 User Manual

OPERATING INSTRUCTIONS
1. Press the or buttons to decrease/increase the HOUR; press
the HOUR. The MINUTES will begin to flash.
2. Press the or buttons to decrease/increase the MINUTES; press
confirm the MINUTES. ALARM MODES will begin to flash.
The ALARM MODE settings are as follows:
1-5 : Monday to Friday
1-7 : Whole week
3. Press the or buttons to toggle between the ALARM MODE settings; press
the button to confirm your selection. The Wake options will begin to flash.
4. Press the or buttons to toggle between the Wake options (AM*, FM* or
buzzer); press the button to confirm your selection.
5. If radio is selected please select an alarm
button to confirm your selection.
To deactivate ALARM 1 and/or ALARM 2, press and hold the
1
button until the icon ( or 2 ) is no longer visible on the front LED panel.

ALARM DURATION

The BUZZER alarm or RADIO alarm will sound for 30 minutes if no key is pressed, then it
will stop automatically and resume to the same alarm time on next scheduled day. To stop
ALARM 1 and/or ALARM 2 when sounding, press the

SNOOZE FUNCTION

When alarm is sounding, press the SNOOZE/SLEEP/DIM button to stop alarm for 9
minutes. Alarm will resume after 9 minutes.
• Pressing the button will CANCEL the Snooze function; Snooze function will also
stop automatically after 30 minutes.
to confirm
6-7 : Saturday & Sunday
1-1 : One day of week
or buttons & press the
button and/or the
button on top of the unit.
- 16 -

SLEEP TIMER

The sleep timer allows you to listen to music for a preset amount of time ranging from 90
minutes to 10 minutes. It is commonly used by people who prefer to fall asleep to music.
to
1. Press the
2. Press the SNOOZE/SLEEP/DIM button to toggle through the preset times;
90min > 60min > 30min > 15min > OFF
3. To cancel the SLEEP timer, press the SNOOZE/SLEEP/DIM button until you see OFF
in the display or press the

ADJUSTING LED BRIGHTNESS

You can adjust the brightness of the LED display making it brighter, dimmer or even
turning it OFF when the radio is OFF. There are four dimming options available: HIGH/
MEDIUM/LOW/OFF (Standby). Press the DIMMER/GRADATEUR button to toggle between
the four brightness settings.

LISTENING TO THE RADIO

1. Press the
2. Press the
3. Press the
4. Press and hold the
through the stations; the unit will automatically scan to the next broadcasting
station.
5. Press the
OPERATING INSTRUCTIONS
button to turn the radio 'ON'.
button.
button to turn the radio 'ON'.
AM / FM button to toggle between AM and FM radio bands.
or buttons once, to move back/forward one station at a time.
or buttons for one second to scan back/forward
button to turn the radio 'OFF'.
- 17 -