Noise/Vibration Information; Declaration Of Conformity; Battery Charging - Bosch AHS 48 LI Original Instructions Manual

Hide thumbs Also See for AHS 48 LI:
Table of Contents

Advertisement Page 22 Monday, December 13, 2010 12:55 PM
22 | English

Noise/Vibration Information

Measured sound values determined according
to 2000/14/EC.
Typically the A-weighted noise levels of the
product are: Sound pressure level 79 dB(A);
sound power level 87 dB(A). Uncertainty
K =3 dB.
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
tainty K = 1.5 m/s
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 (battery
powered product) and EN 60335 (battery charg-
er) according to the provisions of the directives
2006/95/EC, 2004/108/EC, 2006/42/EC,
2000/14/EC: Guaranteed sound power level
90 dB(A). Conformity assessment procedure ac-
cording to Annex V.
F 016 L70 729 | (13.12.10)
Equipment category: 25
Technical file at:
Bosch Lawn and Garden Ltd., PT-LG/EAE,
Stowmarket, Suffolk IP14 1EY, England
Dr. Egbert Schneider
Senior Vice President
= 2.5 m/s
, Uncer-
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
For Your Safety

Battery Charging

Note: The battery is supplied partially charged.
To ensure full capacity of the battery, complete-
ly charge the battery in the battery charger be-
fore using your power tool for the first time.
The lithium-ion battery can be charged at any
time without reducing its service life. Interrupt-
ing the charging procedure does not damage the
Removing the Battery
Press the battery unlocking button and pull out
the battery 6 toward the rear.
Charging Procedure (see figure A)
The charging procedure starts as soon as the
mains plug is plugged into the socket and the
battery is then inserted into the battery charger
Dr. Eckerhard Strötgen
Head of Product
Warning: Switch off and remove battery
from machine before adjusting or cleaning.
The blades continue to move for a fraction
of a second after the hedgecutter is
switched off.
Do not touch the moving blades.
Bosch Power Tools

Hide quick links:


Table of Contents

Table of Contents