Setting User Data - Sportline TraQ 370 Instruction Manual

SETTING THE PEDOMETER FUNCTIONS

SETTING USER DATA

The Sportline TraQ is equipped with an advanced Pedometer that measures Steps, Speed,
Distance, Calorie Expenditure and Exercise Time. In order to ensure exercise data is as
accurate as possible, you must enter your personal profile.
Scroll to User Data (display will read AGE) by
1.
the
2. PRESS
Adjust Age by
3.
Select Weight Units (LB or KG) by
4.
Advance to Set Stride Length.
Select Units of measure (INCH or CM) by
5.
Advance to Set Stride Length.
Select Stride Length Units (INCH or CM) by
6.
to Advance to Set Stride Length.
Adjust WALK Stride length by
7.
to Set RUN Stride Length.
Adjust Run Stride length by
8.
Set daily step GOAL.
Adjust daily step GOAL
9.
the
MODE
TIP:
To more accurately set Stride: run/walk a defined distance (i.e. 100 yards/meters). Count the number of steps/strides.
Divide number of steps/strides by the distance (in inches or centimeters) to get your average stride length.
9
WV4406IS01SPTRA.indd Sec2:9 WV4406IS01SPTRA.indd Sec2:9
PRESSING
key to enter the programming sequence.
RESET
the key. the
PRESSING INFO PRESS
the
PRESSING INFO
PRESSING
PRESSING
the
PRESSING INFO
the key.
PRESSING INFO
the key and advancing to next digit by
PRESSING INFO
key.
the key.
MODE
key to Advance to Set Weight.
MODE
key. the key to
PRESS MODE
the key. the key to
INFO PRESS MODE
the key. the key
INFO PRESS MODE
key. the key to Advance
PRESS MODE
the key to Advance to
PRESS MODE
PRESSING
6/3/10 3:23 PM 6/3/10 3:23 PM