Setting User Data - Sportline 310 User Manual

SETTING THE PEDOMETER FUNCTIONS

SETTING USER DATA

The Sportline Qlip is equipped with an advanced Pedometer that measures Steps, Speed,
Distance, Calorie Expenditure and Exercise Time. In order to ensure exercise data is as
accurate as possible, you must enter your personal profile.
Scroll to Step mode by
1.
2. PRESS & HOLD
Select Distance Units (Mile or KM) by
3.
Advance to Set Weight.
NOTE:
If Miles are selected, weight will be measured in pounds and stride length will be measured in inches. If Kilometers
are selected, weight will be measured in kilograms and stride length will be measured in centimeters.
Adjust Weight by
4.
Length.
Adjust Stride Length by
5.
Stride Length.
TIP:
To more accurately set Stride: run/walk a defined distance (i.e. 100 yards/meters). Count the number of steps/strides.
Divide number of steps/strides by the distance (in inches or centimeters) to get your average stride length.
PRESS & HOLD ADJUST
10
the
PRESSING
the key to enter the programming sequence.
ADJUST
the
PRESSING RESET
the
PRESSING
the key to return to Step mode.
PRESS MODE
ADJUST: PRESS RESET
key.
MODE
the
PRESSING RESET
key. the
PRESS MODE
key. the
RESET PRESS
SET: PRESS MODE
key. the
PRESS MODE
key to Advance to Set Stride
key to Advance to Set
MODE
CONTINUE THROUGH
ALL FIELDS. PRESS THE
MODE KEY TO RETURN TO
OPERATING MODE
key to