Installing The Retention Mechanism; Removing The Tape Protector From The Fan Sink - Acer Power 4100 User Manual

Figure 4-18 Installing the Retention Mechanism
3. Remove the processor card from its protective packaging. Make sure that the latches on
the sides of the module are not pressed.
4. Remove the thermal tape protector at the back of the fan sink.
Figure 4-19 Removing the Tape Protector from the Fan Sink
5. Insert the wide clip ends into the wide holes on the processor and the narrow clip ends
into the narrow holes.
4-20 AcerPower 4100 User's Guide