Boot Options; Boot Sequence; First Hard Disk Drive; Primary Display Adapter - Acer Power 4100 User Manual

The following screen appears if you select Boot Options from the main menu:

Boot Sequence

1st [Floppy Disk]
2nd [Hard Disk]
3rd [CD-ROM]
First Hard Disk Drive ................. [IDE]
Primary Display Adapter ............... [Auto]
Fast Boot ............................. [Auto ]
Silent Boot ........................... [Enabled ]
Num Lock After Boot ................... [Enabled ]
Memory Test ........................... [Disabled]
*Configuration Table ................... [Disabled]
*Boot from LanDesk Service Agent ....... [Disabled]
↑↓ = Move Highlight Bar
Esc = Exit
3.7.1 Boot Sequence
This parameter allows you to specify the boot search sequence. To change the order of
devices, simply press
3.7.2

First Hard Disk Drive

This parameter specifies whether the BIOS utility will boot from an IDE hard disk drive or a
SCSI hard disk drive. The system will automatically boot from an IDE hard disk if your system
does not have a SCSI hard disk drive. The default setting is
3.7.3

Primary Display Adapter

Setting this parameter to
onboard video controller is considered as the primary display adapter. If you installed a video
3-24 AcerPower 4100 User's Guide

Boot Options

or
enables the onboard video controller. Normally, the
Onboard
F1 = Help
→ ← = Change Setting,
.
IDE
Page 1/1