System Error Messages - Acer Power 4100 User Manual

Table 1-1 System Error Messages (continued)
Error Message
Onboard Serial 1 Conflict
Onboard Serial 2 Conflict
Onboard Parallel Port
Conflict
PS/2 Pointing Device
Error
PS/2 Pointing Device
Interface Error
Press F1 key to continue
or Ctrl-Alt-Esc for Setup
Press Esc to turn off NMI,
any key to reboot
Protected Mode Test Fail
RAM BIOS Error
Real Time Clock Error
Shadow RAM Fail
System Memory Address
Error
1-18 AcerPower 4100 User's Guide
Corrective Action
Run Setup and disable Onboard Serial
1. See Chapter 3.
Run Setup and disable Onboard Serial
2. See Chapter 3.
Run Setup and disable Onboard
Parallel Port. See Chapter 3.
Check or connect the pointing device.
Contact your dealer.
Contact your dealer.
Press or
Press to disregard NMI error.
Press any key to reboot the system.
Contact your dealer.
Contact your dealer.
Run Setup. See Chapter 3.
Contact your dealer.
Check DIMMs on system board or
contact your dealer.
.