System Information - Acer Power 4100 User Manual

↑↓ = Move highlight bar
Esc = Exit
The command line at the bottom of the menu tells you how to move within a screen and from
one screen to another.
•
To select an option, move the highlight bar by pressing
•
Press to move to the next page or
•
To change a parameter setting, press
•
Press to return to the main menu. If you are already in the main menu, press
again to exit Setup.
The parameters on the screens show default values. These values may not be the same as
those in your system.
The grayed items on the screens have fixed settings and are not user-configurable.
Setup Utility

System Information

Product Information
Disk Drives
Onboard Peripherals
Power Management
Boot Options
Date and Time
System Security
*Advanced Options
Load Default Settings
Abort Settings Change
The key works only when you are in the
main menu. This means that you can
activate the Advanced Level only when you
are in the main menu.
↵
= Select
or
to return to the previous page.
or until the desired setting is found.
Chapter 3 - BIOS Utility
then press .
3-3