Drive As - Acer Power 4100 User Manual

•
[1.44 MB,
•
[2.88 MB,
Follow the same procedure to configure floppy drive B. Choose
second floppy drive.
3.4.2 LS-120 drive as
This parameter allows you not only to enable the LS-120 device installed in your system, but
also to specify the function of the device. The setting affects how BIOS will detect the device.
Possible settings are:
•
In this setting, BIOS does not support the LS-120 drive. The drive needs the
Normal
LS-120 device driver to operate.
•
BIOS recognizes the LS-120 drive as drive A. If a standard diskette drive A
Drive A
exists, BIOS automatically identifies it as drive B. If a standard diskette drive B exists, it
automatically becomes inaccessible.
If two LS-120 drives exist, BIOS recognizes them as drive A and drive B, respectively.
•
BIOS recognizes the LS-120 drive as drive B. If a standard diskette drive B
Drive B
exists, it becomes inaccessible.
•
Hard Disk
the LS-120 drive as any other hard disk and assign it a drive letter C, D, E, and so on. See
the documentation that came with the LS-120 drive for more information.
3-12 AcerPower 4100 User's Guide
3.5-inch]
3.5-inch]
BIOS recognizes the LS-120 drive as a hard disk. In this setting, format
if you do not have a
None