Pre-Installation Instructions - Acer Power 4100 User Manual

4.1.2

Pre-installation Instructions

Always observe the following before you install a system component:
1. Turn off the system power and all the peripherals connected to the unit before opening it.
Read section 1.5 for information on how to properly turn off the system.
2. Open the system according to the instructions in the housing installation manual.
3. Follow the ESD precautions in section 4.1.1 before handling a system component.
4. Remove any expansion boards or peripherals that block access to the DIMM sockets or
CPU socket.
5. See the following sections for specific instructions on the component you wish to install.
4-2 AcerPower 4100 User's Guide
Make sure that the system is unplugged..
Do not attempt the procedures described in
the following sections unless you are a
qualified service technician.