Capturing Macintosh Screens - Epson PhotoPC600 User Manual

Capturing Macintosh Screens

EPSON Photo File Uploader for the Macintosh does not
have a screen capture feature. However, you can make screen
shots using your Macintosh system software, then use
EPSON Photo File Uploader to upload the screen captures
to your camera.
The procedure may be different depending on your
Macintosh. See your computer manual for detailed
instructions on making screen shots.
Make sure the camera is connected to your Macintosh, and
both the computer and the camera are turned on. Then
follow these steps:
1
Open the EPSON Photo File Uploader as described
on page 9-6.
2
Start your application and open the file to the image you
want to capture.
9-8 Using Your Camera for Presentations
NOTE
The entire desktop is captured, not just the active window.
Make sure you make your document window as large as
possible before you capture it. If you set your application to
"slide show" mode (or the equivalent) you can capture just
the image you want, without menus and other screen
elements.
3
Press the Command , Shift , and 3 keys on your
computer keyboard at the same time. Your Macintosh
names and saves the screen shot on your hard drive (not
in a folder).
You can make as many screen shots as you'd like; simply
repeat this step.
4
When you are finished, close your application.
To upload your screen shots to the camera, click the EPSON
Photo File Uploader window to make it active, then follow
the uploading instructions starting with step 3 on page 9-4.