Epson PhotoPC600 User Manual page 125

Check the serial port settings in your Image Expert or
EPSON Photo!2 software. You may need to change the
Port and Speed serial connection settings to Auto.
Avoid opening or working with other software
applications while the camera and computer are
communicating.
You are unable to drag and drop photos into a document.
If you're using Windows 3.1, this method of getting
pictures into your documents may not be reliable. Try
importing or using copy and paste.
If your system has less than 16MB RAM, you may not
be able to use drag and drop. Make sure you don't run
too many applications at the same time. You may need
to add memory to your system or use another method of
getting photos into your documents.
You are unable to copy and paste or import your photo into
a document on your Macintosh.
Try increasing your virtual memory using the Memory
Control Panel.
Increase the memory allocation for your word processor
or other application. (Select the application and choose
Get Info from the File menu.)
Try turning off any extensions that are unnecessary. See
your computer documentation or online help for more
information about changing memory settings and
turning off extensions.
The pictures transfer to your computer too slowly.
If your system has less than 16MB RAM, the transfer
speed may be slow. Try using virtual memory. See your
computer documentation or system help for more
information.
Check the port setting in your Windows Control panel.
You may need to set your port to a faster speed. See your
Windows documentation or help system for more
information.
Maintenance and Troubleshooting 11-5
11
A
B