Table of Contents
Advertisement
If you need to create a new folder for the images, click
the New Folder button.
4
Specify the key combination you want to use for screen
captures in the Hot Key setting box. Click the ALT ,
CTRL
, or SHIFT checkbox, then select a key from the
hot key list. The default hot key is F5 .
5
Click Start to activate the key combination. When the
key combination is activated, the Start button changes
to a Stop button. The key combination remains active
only for the current session. To deactivate the hot key
combination, press the Stop button.
6
Start your application and open the file to the page or
image you want to capture.
NOTE
The entire screen is captured, not just the active window.
Make sure you maximize your presentation before you
capture it. If you set your application to "slide show" mode
(or the equivalent) you can capture just the image you want,
without menus and other screen elements.
7
Press the hot key combination you selected.
You can make as many screen captures as you'd like;
simply open each file you want to capture and press your
screen capture key combination again.
8
When you are finished, close your application and click
the Stop button on the Screen Capture dialog box. The
key combination you selected is erased.
If you want to upload your screen captures to the camera
right away, click the Upload To Camera tab. The screen
capture files appear in the File Name list. Then follow the
uploading instructions starting with step 4 on page 9-2.
TIP
Presentations using large fonts (at least 18 point) work best.
Using Your Camera for Presentations 9-7
9
A
B
Advertisement
Table of Contents
