Projecting Your Presentation - Epson PhotoPC600 User Manual

Projecting Your Presentation

You can display the uploaded images on a multimedia
projector, television, or other video output device. Use the
video cable that came with your PhotoPC 600.
Follow these steps:
1
Make sure your camera and video projector are turned
off.
2
Open the camera's connector cover and connect the
black end of the video cable to the Video Out port as
shown below:
3
Connect the yellow end of the video cable to the video
input port on the projector as shown on the right.
4
Turn on the video projector and switch it to video
mode.
5
Slide the camera's screen switch to Playback .
The last image that you uploaded into the camera is
projected. If you are using the optional AC adapter, you can
also see the image on the LCD screen.
You can use the camera's slide show feature to play your
images automatically, or play them one at time using the
navigation buttons. You can use all of the camera's other
playback features to show your presentation.
Using Your Camera for Presentations 9-9
9
A
B