Epson PhotoPC600 User Manual page 123

You can't take a picture with the camera.
The flash may be recharging. Wait until the status light
turns green, and try again.
The camera may be full. Check the picture counter on
the display panel. Erase some pictures (see Chapter 3),
or transfer the pictures to your computer and then erase
them (see Chapter 4). Or, install a CompactFlash
memory card to store more pictures (see Chapter 10).
The camera may be connected to your computer. When
it's connected, you can't use any of the controls on the
camera itself. See Chapter 8 for instructions on taking
pictures from your computer.
The flash doesn't work.
Make sure the flash is not set to the flash off setting.
Check the batteries and make sure they are installed
correctly. Recharge or replace the batteries if necessary.
You can't use the flash when you adjust the shutter
speed manually with the camera connected to the
computer. Set the shutter speed to automatic to use the
flash.
Your LCD screen flickers.
Check the lights around you. The screen may appear to
flicker under fluorescent light. This does not affect your
picture quality.
Nothing appears on the LCD screen.
If you're using View mode, make sure the power is on.
Check your batteries and make sure they are installed
correctly. Recharge or replace the batteries if necessary.
The image on the screen is too dark.
Adjust the brightness of the screen using the Settings
menu. See page 8-10 for instructions.
Maintenance and Troubleshooting 11-3
11
A
B