Page 1
Pro has been designed to provide the best combi- ® nation of performance, features, durability and ease of use and installation. The following functions are available on your SpeedZone Pro bicycle computer: • SPD - Current Speed • AVS - Average speed • MAX - Maximum Speed •...
Page 2
• Second Wheel Option MOUNTING • Easy Calibration Mode THE SPEEDZONE PRO • Wireless Mounting System The SpeedZone Pro wireless transmitter • Heavy-duty abrasion resistant can mount on the right or the left side pick-up wire FI GU RE 1: FI GURE 2: of the fork blade.
1/32"-1/16" (1-2mm). SpeedZone Pro. Run the cadence sen- Tighten the magnet and transmitter. sor wire along the head tube, down FI GUR E 5: FI GUR E 6: Do not over-tighten the magnet screw.
Page 4
"MODE" button until ODO (odometer) held to scroll to the correct digit.) Press Odometer SpeedZone Pro requires it to be placed appears on the left side of the display This mode is useful if you have the "FUNCTION" button to select the in various "modes"...
Page 5
When using Easy Calibration Mode, The roll out method will provide the one, and 2134 for wheel two) when programming your computer. the SpeedZone Pro will display the tire most accurate computer calibration (See figure 8) size on its LCD display screen. (See...
Page 6
You may also use the following select the next digit to the right. The hour digit will now begin flashing. quick-reference chart: Repeat the process until all four digits Press the "MODE" button to adjust the Generic Tire Size Chart are entered as your tire circumference.
Page 7
5. Timer Selection AVS is based on the total time the stop- mode has been selected, press the this number and advance to minutes. The timer can be selected for either watch is turned on or activated. "FUNCTION" button to advance to the Repeat this process until minutes and Automatic Timer Mode (ATM) or Timer (See figure 11)
7. Temperature topographical map or by contacting COMPUTER FUNCTIONS Your Speedzone Pro is equipped with a nearby airport. Speedometer a therm o m e t e r. To enter temperature Speed is always indicated on the top gauge mode, press the “MODE” button line of the screen.
Page 9
attained. The maximum speed can be Interval Timer (INT) reset by pressing the "FUNCTION" The interval timer is displayed on the button for three seconds. (Seefigure 14) lower line of the screen when (INT) appears on the left. The timer indicates Auto Start/Stop Timer (ATM) the end of an interval with one short In ATM mode the stopwatch function...
Page 10
FIG URE 16 : TR IP DISTA NC E SCREEN Temperature (TMP) the SpeedZone Pro is capable of stor- is 0.01 miles (0.01 Kilometers). The Your Speedzone Pro is equipped with ing two tire sizes. You can change trip distance is shown on the lower line a thermometer.
"AC" button on the • Make sure the magnet and than 1/16" (2mm) from the magnet. Your SpeedZone Pro Computer comes bottom of the case with the tip of a pen the transmitter are well aligned.
Specialized will at its option, repair 0.0 to 199.9 MPH Odometer (ODO) • The SpeedZone Pro Computer com- or replace your defective computer. 0.0 to 199.9 Km/H 0 to 99,999 miles or Km puter is intended for use on...
Need help?
Do you have a question about the SpeedZone Pro and is the answer not in the manual?
Questions and answers