Check Sidestand; Check Fasteners - Victory V92TC Owner's Manual

Pre-Operation Check

Check Sidestand

Straddle the motorcycle and bring it to a vertical position. Move
the sidestand to its stored (up) position, then to its fully extended
(down) position, and back again. It should move smoothly and
quietly. When the sidestand is in its stored position, the sidestand
return spring should hold the sidestand tightly against the
motorcycle.
Check the condition of the sidestand rubber pad, and make sure it
is firmly attached to the sidestand.

Check Fasteners

Visually inspect the entire motorcycle chassis and engine for loose, damaged, or missing fasteners. Tighten
loose fasteners to the proper torque (see the Specifications section of the Owner's Manual, or the Victory
Service Manual). Replace stripped, damaged, or broken fasteners with genuine Victory fasteners of equal size
and strength immediately.
56
1
1. Sidestand
2. Rubber Pad
2