Adjust Auxiliary Lights - Victory V92TC Owner's Manual

Maintenance

Adjust Auxiliary Lights

Each lamp should shine straight ahead or
slightly to the right of the motorcycle. The top
of each lamp beam should be just below the
center of the lamp at a distance of 25 feet
(7.62 m).
1. Check and adjust the tire pressure and
rear shock absorber.
2. Straddle the motorcycle in an upright
position and sit in the operator's seat.
3. Set the ignition switch to the On
position and turn the auxiliary lights
on. Check the auxiliary lights for
correct aim.
4. To adjust the lights, remove the front running light/turn
signal bracket to expose the auxiliary light nut. Loosen the
nut and adjust the auxiliary light.
5. Tighten the auxiliary light nut and recheck the light for
correct aim.
6. Reinstall the front running light/turn signal bracket.
110
25 feet (7.62 m)
Center of Driving Light
1. Running Light/Turn Signal Bracket
1