Headlamp; Taillight; Turn Signals/Running Lights; Emergency Flashers - Victory V92TC Owner's Manual

Pre-Operation Check
Pressing the MFD Mode button should advance the MFD through the various functions (see page 33).

Headlamp

Check the headlamp to see that it is on. Set the headlamp switch to the high beam position. The headlamp
brightness should increase and the headlamp high beam indicator in the instrument cluster should illuminate.

Taillight

With the ignition switch in the On position, the taillight and the license plate light should illuminate. Apply
slight pressure to the front brake lever; taillight brightness should increase. Apply slight pressure to the rear
brake pedal; taillight brightness should increase.

Turn Signals/Running Lights

The two amber front running lights should illuminate (US and Canadian models only). Move the turn signal
switch to the left. The front and rear left turn signals, and the left turn signal indicator in the instrument
cluster, should flash. Push the switch in toward the housing. The turn signals and turn signal indicator should
stop flashing. Repeat the procedure for the right turn signals.

Emergency Flashers

Slide the emergency flasher switch to the left. All four turn signals, and both turn signal indicators in the
instrument cluster; should flash. Slide the switch to the right. The turn signals and turn signal indicators
should stop flashing.

Horn

Press the horn button. The horn should sound loudly.
46