Fuel; Check Fuel Level; Check Fuel Hose, Rail, And Connections; Check Evaporative Emission Control System (California Model Only) - Victory V92TC Owner's Manual

Pre-Operation Check
WARNING
Do not operate the motorcycle with the oil level above the FULL mark or below the ADD mark.
Operating the engine with too much or too little oil can cause serious engine damage or engine
seizure, resulting in you losing control of the motorcycle.

Fuel

Check Fuel Level

1. Straddle the motorcycle on level ground and bring it to a vertical position.
2. Turn the ignition switch to the On position and press the multi- -function display (MFD) Mode button
until the fuel gauge appears in the MFD.
3. Note the fuel level.
4. Estimate your next fuel stop and plan accordingly.

Check Fuel Hose, Rail, and Connections

Inspect the fuel hoses for cracks or damage. Inspect the hose connection at the fuel tank and at the fuel rail for
dampness or stains from leaking or dried fuel.

Check Evaporative Emission Control System (California model only)

Visually inspect all evaporative emission control system hoses and connections. Make sure all connections are
tight. Also, inspect the evaporative canister to make sure it has not been damaged.
48